Skip to the calculator
Navigation

BYBIT GLOBAL SPOT · GUIDE 06

Crypto Spot Trading Fee Calculator

Model a buy and sell, inspect fee currencies and calculate net profit, break-even and target prices. All calculations stay in your browser.

TradeMaticPublished, updated & checked · Asia/Sakhalin

Calculate a spot buy and sell

Hypothetical rates. No account connection, registration or data submission.

Loading the local calculator…

Advanced settings

Maker/Taker are labels: enter the actual assumed rate yourself. Coin names do not load prices or confirm bot support. Empty steps mean an unconstrained mathematical model.

The default is a base-coin buy fee and USDT sell fee. Other fee modes are generic examples. A quantity step rounds only the sell order down; no inventory is valued as realised sale proceeds.

Coins received
— ABC
Coins in the sell order
— ABC
Buy fee
— ABC
Sell fee
— USDT
Net sale proceeds
— USDT
Net profit / loss
— USDT
Net return
— %
Theoretical break-even ≈
— USDT
Theoretical target price ≈
— USDT
Prices rounded up to your price step

Break-even price at your step
— USDT
Profit at that price
— USDT
Target price at your step
— USDT
Return at that target
— %
Cash flow and quantity details
Cash-flow itemUSDT
Full buy cost—
Cost allocated to disposed coins—
Net sale cash—
Realised result—
Cash vs whole budget; not profit with inventory—
Remaining inventory cost—
Gross coins before buy fee
— ABC
Buy order notional
— USDT
Buy fee value at buy price; not a second debit
— USDT
Gross sale notional
— USDT
Coins sold plus any base sell fee
— ABC
Unsold coins
— ABC
Cost of unsold coins — not realised
— USDT
Price to recover the entire buy budget in cash ≈
— USDT

What is a crypto spot trading fee?

A spot trading fee is the exchange's charge on an executed purchase or sale. It changes what you receive, so a higher selling price does not by itself establish a profitable round trip. This crypto spot trading fee calculator follows the money and coins separately: purchase cost, acquired quantity, sale proceeds and the result after the selected fees.

The example pair is ABC/USDT. ABC is an invented base asset; prices mean USDT per ABC. A budget or profit measured in USDT cannot be added directly to an amount measured in ABC. The tool is educational and uses your assumptions, without reading a balance, fetching a price or submitting an order. Its default rates are examples, not a quote for your account.

How to use the calculator

  1. Enter the full purchase budget in USDT.
  2. Enter the assumed BUY and SELL prices per coin.
  3. Set the purchase and sale fee percentages independently.
  4. Check the fee currencies in the advanced settings.
  5. Read net proceeds, profit and the return denominator.
  6. Compare break-even and target prices, including any selected price step.

Start with the standard illustrated model: BUY commission in ABC and SELL commission in USDT. Change one assumption at a time. Maker/Taker labels describe the execution you want to model; they do not discover a fee rate. The preset examples are hypothetical inputs, not live opportunities.

Leave price and quantity steps unset for the unrestricted mathematical model. When you supply them, examine the practical price, sold quantity and residual as well as the headline result. Decimal display settings change presentation; they do not authorize discarding intermediate costs.

Maker versus taker: execution role, then rate

A maker adds an order that rests in the book; a taker consumes available liquidity. A market order seeks available liquidity. An ordinary limit order can also cross the book immediately, so “Limit” does not establish maker treatment. Bybit's Post-Only documentation describes canceling an order that would immediately execute. A resting order still has no guaranteed fill.

Do not translate that distinction into an automatic discount. The general VIP 0 crypto-pair table lists the same maker and taker rate, while other tiers differ. Region and special-zone conditions also matter. Check the account's applicable rate using the official fee structure, then enter it here. A label cannot predict execution conditions at the time of a later sale.

BUY and SELL fees can affect different units

In Bybit's standard illustrated Spot case, the fee is taken from the asset acquired: a BUY reduces base coins, while a SELL reduces received quote currency. See the official fee explanation. A base fee already removed from quantity must not also become an extra USDT debit.

The advanced BUY-in-quote model is different and generic. Here the entered budget still includes the fee: BuyNotional = B / (1 + Fb), BuyFeeQuote = B − BuyNotional, and NetQty = BuyNotional / Pb. It never spends the full budget on coins and silently adds another charge outside it.

The generic SELL-in-base model reserves additional base for the fee. Its unrestricted sale quantity is NetQty / (1 + Fs); the fee is SellQty × Fs and total disposal is quantity plus that fee. Quote proceeds are SellQty × Ps. This is not presented as Bybit's default SELL behavior. Fees in a third token require a known conversion basis and are outside this calculator.

Calculate net profit from the actual model

Let B be the complete purchase cost, Pb the buy price and Ps the sell price. Rates Fb and Fs are fractions: 0.1% means 0.001. With BUY fees in base, SELL fees in quote, and all acquired coins sold:

GrossQty = B / Pb
BuyFeeBase = GrossQty × Fb
NetQty = GrossQty − BuyFeeBase
GrossSell = NetQty × Ps
SellFeeQuote = GrossSell × Fs
NetProceeds = GrossSell − SellFeeQuote
NetProfit = NetProceeds − B
NetROI = NetProfit / B × 100%

100 USDT at 10; sale at 10.05; hypothetical fees of 0.1% each.
MeasureResult
Gross coins / BUY fee10 ABC / 0.01 ABC
Net coins9.99 ABC
Gross sale100.3995 USDT
SELL fee0.1003995 USDT
Net proceeds100.2991005 USDT
Net profit / ROI+0.2991005 USDT / +0.2991005%

The BUY fee's purchase-price equivalent is 0.1 USDT. It explains a quantity reduction; subtracting it again from the net proceeds would count the same cost twice.

Break-even price and the next valid tick

For the complete-sale model above, break-even solves NetProceeds = B:

BreakEvenPrice = B / (NetQty × (1 − Fs))

The reference result is approximately 10.02003004 USDT. With a manually entered price step of 0.01, round upward to 10.03, then recalculate proceeds there. Rounding to 10.02 would produce a price below the theoretical requirement. The number of displayed decimal places is not the same thing as a valid order increment.

When only part of the inventory is disposed of, replace the full purchase cost with the cost allocated to that disposal. Break-even then means no loss on the sold portion, while remaining inventory retains its cost. It does not mean all original cash has returned. Neither theoretical nor tick-adjusted break-even guarantees execution, exchange acceptance or recovery of other expenses.

Find a target sale price after fees

Let R be a desired net return as a fraction: 0.3% is 0.003. For a complete sale in the standard model:

TargetPrice = B × (1 + R) / (NetQty × (1 − Fs))

The reference trade needs approximately 10.05009013 USDT for a 0.3% net return. At a 0.01 tick, the upward price is 10.06. Selling at 10.05 gives 0.2991005%, slightly below that target. A small gap still matters when the stated goal is net rather than a rounded gross movement.

For partial disposal, use allocated cost instead of B and the actual sale quantity. With a quote SELL fee, the denominator is SellQty × (1 − Fs); with the generic additional-base fee, it is SellQty. The target concerns the disposed portion's return, not a guaranteed return on the unsold remainder.

Why price growth differs from net profit

A move from 10 to 10.05 is a 0.5% price increase. Our result is only 0.2991005% because fewer coins reach the sale and a second fee reduces quote proceeds. Subtracting two percentages from price growth is only a rough shortcut: percentage charges apply to different quantities and values.

Sale turnover is also different from profit. Receiving about 100.30 USDT after spending 100 does not mean earning 100.30. The relevant full-sale gain is their difference. Compare like quantities and time periods, especially when there are several purchases or exits. The averaging and dip-buying guide explains why multiple lots require a consistent acquisition-cost basis.

Fees matter when the intended move is small

With the same rates and unrestricted quantities, scaling the reference budget to 10 USDT scales the net gain to 0.02991005 USDT. That arithmetic does not establish that a particular pair accepts such an order. Order minimums, increments and rounding can dominate a small position even when a percentage-only model looks attractive.

A narrower target leaves less room for execution costs; more completed trades create more fee-bearing turnover. No fixed number of trades guarantees recovery of those costs. In particular, a green closed-trade counter can coexist with depreciating inventory. The Spot Grid versus DCA comparison distinguishes cycle profit from the wider holding result.

Quantity rounding, partial sales and model limits

For a supplied quantity step, round the available sale quantity downward. Never round it above available inventory. In the generic additional-base SELL-fee mode, reserve the fee before applying the step. Let D include both sold base and any additional base commission:

AllocatedCost = B × D / NetQty
RealizedProfit = NetProceeds − AllocatedCost
SoldROI = RealizedProfit / AllocatedCost × 100%
ResidualCost = B − AllocatedCost
CashDelta = NetProceeds − B

CashDelta is not partial-sale profit: some original spending still belongs to residual coins. For the reference inventory and a 0.1 quantity step, 9.9 ABC sells and 0.09 ABC remains. Realized profit is approximately +0.29640590 USDT, while cash change is −0.604495 USDT. Neither treats the remaining coins as worthless or as realized income.

Manual steps do not check every exchange rule. The V5 instrument schema separates price increments, Spot base precision and order-value limits; our quantity-step control is a generic input. Spot rules also allow canceled or partial execution. Actual fills, fee rounding, rebates, third-token fees, slippage, tax and transfers can differ from this assumed two-leg model. Read the risk disclosure.

How TradeMatic handles fee targets and accounting

The inspected TradeMatic Bybit path confirms BUY execution quantities and quote amounts before planning a linked limit SELL. Known base BUY fees reduce acquired quantity. Its raw target uses actual BUY average multiplied by 1 + growthPercent/100 + buyFeeRate + expectedSellFeeRate. It rounds the SELL price upward and quantity downward under instrument rules. This planning estimate differs from the calculator's exact inverse net-return equation.

The actual BUY average is executed quote divided by gross base. Accounting cost includes executed quote and applicable known quote or valued third-token fees; a base BUY fee reduces quantity instead of creating a second quote charge. Linked fills and allocated cost determine realized results. Sold base and any base SELL fee consume inventory; remaining quantity and cost stay separate. A FILLED status alone does not prove complete realized accounting: missing or conflicting cost/fee evidence can leave the result unconfirmed.

The calculator therefore need not match a bot order to the last digit. It neither reads nor changes TradeMatic settings. See the target-sale guide, operating rules and API setup guide for their different purposes.

Frequently asked questions

How are crypto spot fees calculated?

Apply the selected fee rate to the relevant filled amount and preserve its currency. Our standard model reduces acquired coins on BUY and quote proceeds on SELL.

What is the difference between maker and taker?

A maker provides resting liquidity; a taker consumes available liquidity. The account's applicable rate determines the cost. The labels themselves do not guarantee different percentages.

Does a limit order always pay maker fees?

No. It can cross immediately and take liquidity. Post-Only cancels that immediate-execution case rather than guaranteeing that a resting order will eventually fill.

How do I calculate profit after trading fees?

Subtract allocated purchase cost from net sale proceeds. If everything is disposed of, allocated cost is the full purchase cost. With residual coins, keep their cost separate.

How do I calculate my break-even sell price?

Divide the disposed portion's cost by the sale quantity after the selected quote-fee adjustment. For the standard complete-sale example, use B / (NetQty × (1 − Fs)).

Does Bybit charge fees on canceled orders?

Its Spot explanation excludes unfilled or canceled remainders. A partially filled order can still incur fees on executions that already happened; cancellation does not reverse those trades.

Are trading fees included in the target price?

This calculator's target equation includes the entered fee assumptions. Its practical price also uses the selected tick. Different bot planning rules and actual execution can produce different results.

Why does the calculator differ from exchange history?

History reflects actual fills, prices, fee amounts and currency rules. This tool uses assumptions and optional manual steps; it does not reproduce every exchange rounding or partial-fill sequence.

Can I change the fee rate?

Yes. BUY and SELL rates are independent, and zero fees can be modeled. Enter the relevant account rates; choosing Maker or Taker does not retrieve them.

Is the calculator connected to my Bybit account?

No. The calculation needs no account login, API key, wallet or Telegram connection. Its inputs are used locally for the educational result, not to place trades.

Official sources and scope

Official Bybit documentation checked on 14 November 2026. The order examples are hypothetical, not live trades. TradeMatic behaviour was checked against current source code without accessing accounts or placing orders.